AgieCharmilles CUT 300 Sp

The AgieCharmilles CUT 300 Sp is the most versatile machine range on the market, capable of cutting 45° cones, and can do this whatever the height of the part. The principle of crossed double guiding of the X, Y, U and V axes independently and of the same dimensions, allows machining to be done with a large taper, thurs widening the scope of possible applications for wire spark erosion.

Save energy – an economic and ecological necessity

Wire cutting EDM Cut 300

The excellence of the AgieCharmilles CUT 300 also resides in the control of operational costs. The otential for using less expensive wires and reduced filtration cost, added to a lower consumption of electricity, make the AgieCharmilles CUT 300 particularly economical machines to run.

In order to control production costs, saving energy has become a priority in many workshops. The Econowatt modules manage the electrical power of the machine so as to never waste energy while the machine is running unattended.

Request a quote for the AgieCharmilles CUT 300 Sp

Key Points

  • Industrial cutting speed  up to 400 mm2/min at low cost
  • Fast improvement of the surface quality (three cuts)
  • Fast threading : 20’’ spark to spark
  • Traveling speed 3 m / min secured by  a proven collision protection
  • Taper-Expert smart module for best taper accuracy


X, Y, Z travel
550 x 350 x 400mm
21.654 x 13.78 x 15.748 in
Working range
U, V travel
550 x 350mm
21.654 x 13.78 in
Taper angle_height
30 / 400°/mm
30 / 15.75 ° / in
Workpiece and electrode
Workpiece dimensions (W x D x H)
1200 x 700 x 400mm
47.244 x 27.559 x 15.748 in
Max. workpiece weight
3306.9 lb
Wire circuit
Available wire diameters (Standard)
0.15 – 0.33 (0.006 – 0.013)mm
0.006 – 0.001 (0.0 – 0.001) in
Permissible weights and types of spools (ISO)
8, 25kg
17.64, 55.12 lb


Download the brochure

Reference not found: /content/gfac/country_ES/en/Products/EDM/wire-cut-edm/jcr:content/cra/standard_teaser_de73

Reference not found: /content/gfac/master/en/service/flyout_teaser/jcr:content/par/sub_navi_teaser_a288