WorkPal 1

intro-WorkPal1

Automation made simple

  • Smallest footprint
  • Loading the table of your Milling, WEDM or grinding machine
  • Easy to operate, glass doors gives maximum visability and access to the magazine.

Achieve greater return on your investment!

Small footprint!

WorkPal 1 is a pallet changer that requires minimal floor space. It is designed for automatic changing of pallets in chucks on machine tables in: 

  • milling machines
  • wire EDM machines
  • laser machines
  • grinding machines.

With a sliding door across one full side, the WorkPal 1 gives maximum access to the magazine. This greatly facilitates the loading and unloading of pallets.


WireEDMing

Wire-cutting EDM (wireEDM) application:

WorkPal 1 + wire EDM machine

The changing arm lifts the pallets over the tank in WEDM machines.

Optional: WorkPal 1 equipped with Cell PC.

Milling1

Milling application:

WorkPal 1 + milling machine

Optional on WorkPal 1 - Plexi glass door

Magazine capacaty/application Pallet system
No of positions
Table chuck - milling, grinding oder EDM Macro 54 & 70
24, 40 or 60
  Macro with chip guard 24
  MacroPT 60 
  Matrix 110  20 
  GPS 70
24, 40 or 60
  GPS 120
20
  Macro Ø 116
20
  MacroMagnum
6, 10 or 12
  Matrix 142  6, 10 or 12 
  GPS 240
7
  Dynafix
5
  UPC (fork gripper or RCS) 
  ITS 50  24, 40 or 60 
  ITS 148  6, 10 or 12 
Table chuck - wire EDM Macro WEDM 12
  MacroTwin WEDM 4
  PSW (RDS grippper) 12
Wire EDM B-axis Macro 54 & 70 12, 24 or 40
  ITS 50  12, 24 or 40 

Technical specifications

TechSpec4

No expensive machine modifications are required.
The changing arm lifts pallets over the tank in wire EDM machines.

Optional for WorkPal - Drying station

 

TechSpec3

 

 

Technical specifications:
Transfer weight (may be limited by the pallet system) 50 kg. (pallet with workpiece)
111 lbs (pallet with workpiece)
Maximum total weight in the magazine 300 kg
667 lbs
MR, X and Z axes AC servo motor
Maximum horizontal stroke (X) and speed 828 mm, Speed 1200 mm/s
32.6 in
Maximum vertical stroke (Z) and speed 400 mm, Speed 650 mm/s
15.7 in
Maximum MR axis stroke and speed 360°, Speed 90°/s
Required power supply
single-phase, 180 – 240 V AC, 14 A at 180 V AC, 20 A at 230V
Required air pressure 6 ± 1 bar, 150 litres/minute
Required floor space 1200 x 1214 mm
47 x 48 in
Interface – serial RS232/422, M function or parallel I/O  

Options & accessories

 
In-built lighting  
Integrated drying station with/without thermostat for temperature control  
ID-system with or without automatic scanning  
Cell PC with WorkShopManager software  
Chip guard for Macro 54 & 70 U-50167.55
Code carrier 3R-863.01-10, 3R-863.01-10M, 3R-863.25-10, 3R-863.30-10 or C690 800