C280320, Chuck HHP built-up with flange, with mounting bores

C280320

For installation on a machine table. 

Please submit dimension diagram of the mounting bores.

  • Clamping force: 15.000 N
  • Holding force: 60.000 N
  • Material: stainless steel, hardened and ground
  • Material flange: stainless steel, heat pre-treated
  • Hydraulic pressure: 30 - 70 bar
  • Air pressure: 6 bar
  • Accuracy: < 0.005 mm
  • Dimensions: Ø 198 x 52 mm
  • Spare part set: S840010
EDM-MILLING

Drawing

with customized mounting bores

C280320

Facts

  • Repeat accuracy of the devices and workpieces < 0.005 mm
  • Mechanical clamping by spring force
  • Hydraulic release and lift-off of the devices
  • Hydraulic pressure 30 to 70 bar
EDM / Milling
EDM / Milling
System-3R
Feature

Application

C280000_Application2

Technicality

Centring free of play

Drawbar-positions

One special feature in relation to modular equipping of the machine tables is the option for arrangement and number of chucks. Regardless of the requirements of the application, you determine the quantity and the particular centre distance with which you wish to equip the machine table.
Our recommendation: use at least 4 chucks per workpiece or work with pallets.

The drawbars are mounted directly in the device or workpiece. Centring of the conical face of the centring and compensating drawbars free of play achieves maximum accuracy.

The centre distance

Centre-distance

The centre distance is the centre-to-centre distance between the relevant chucks. The recommended centre distance is the default centre distance of 250 mm or 200 mm (with HCP also 100 mm are possible).

A centre distance in X or Y direction should be selected quadratically. This offers the advantage that, for instance, a device or workpiece can be indexed in the case of machining operations on a 3-axle machine.