AgieCharmilles DRILL 20

AgieCharmilles DRILL 20 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gaz turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from melting. With its five axis configuration the machine can drill holes at any angles on a inclined surface workpiece.

AgieCharmilles DRILL 20

Shorten your setup time

Process monitoring and optimization are implemented via the operator console. Sensors for short circuits, temperature and liquid level ensure safe operation. Numerical controlled X, Y and Z axes and a variety of touching cycles, offers convenience for the operator when set up.

Make your life easier

The data input on the operator console is quick and simple. Technology settings are selected automatically by material electrode / piece, piece height and electrode diameter. Touching cycles can be programmed and called up with a few commands.


Maximum drilling depth

Maximum drilling depth

With drilling depths of up to 200 mm (7.78 in), DRILL 20 is the ideal vertical drill for an extensive range of applications.

Fine electrode technology

Fine electrode technology

Its technology for fine electrodes Ø0.1 – 0.3 mm (0.004 – 0.012 in), make this machine suitable for drilling fine start holes on lead frames or high-speed stamping molds.


Simply drill holes in multiple configurations

Simply drill holes in multiple configurations

Whatever the need, for small, large, through or blind holes, for single and multi-hole pattern, adapted technology is automatically selected.


Specifications

Main specifications
X, Y, Z travel
300 x 200 x 300mm
11.811 x 7.874 x 11.811 in
Workpiece and electrode
Max. workpiece weight
300kg
661.38 lb
Deionizing
Electrode diameter
0.3 up to 3mm
0.0.118 up to 0.118 in
Maximum drilling depth
200mm
7.874 in
Travel path of the electrode guide
100mm
3.937 in
Heavy duty generator
30A
30 A
General
Mains connection
3 x 400 V, 50/60 Hz
3 x 400 V, 50/60 Hz
Electric supply
Maximum power consumption
5kVA
5 kVA
General
Display
Touch screen, 12.1”
Touch screen, 12.1”
Deionizing
Pump operating pressure
70bar
1014.94 psi
Machine
Machine dimensions width x depth x height
1345 x 910 x 1940mm
52.953 x 35.827 x 76.378 in
Total weight (without dielectric)
870kg
1918.0 lb

Download PDF

 

Request a quote

Request a quote for a machine DRILL 20

Discover more machines

Discover more machines EDM

rConnect

rConnect

Tooling - Automation

Tooling - Automation

Products and solutions