AgieCharmilles DRILL 20

With numerical control axes X,Y and Z , AgieCharmilles DRILL 20 is widely used for drilling starting holes with the electrode range Ø 0.1 – 3.0 mm (0.004 – 0.12 in) and with electrode materials brass, copper and carbide, and workpiece materials steel and carbide.

Simple data input and great application spectrum


Short setup time
Process monitoring and optimization are implemented via the operator console. Numerical controlled axes X, Y and Z with travel paths of 300 x 200 x 300 mm (11.8 x 7.8 x 11.8 in), and a variety of touching cycles offers convenience for the operator when set up.

Simple data input and great application spectrum
The axes X, Y and Z are motor powered and controlled by CNC. The data input on the operator console is quick and simple. Technology settings are selected automatically by material electrode / piece, piece height and electrode diameter. Touching cycles can be programmed and called up with a few commands

Request a quote for the AgieCharmilles DRILL 20

Key Points

  • Wide range of technologies for material steel, hard metal, aluminium and copper etc.
  • Fast programming and erosion for multi-holes with different diameters and technologies
  • Fast set up cycles such as edge finding, center finding and corner finding with touch screen


Main specifications
X, Y, Z travel
300 x 200 x 300mm
11.811 x 7.874 x 11.811 in
Workpiece and electrode
Max. workpiece weight
661.38 lb
Electrode diameter
0.3 up to 3mm
0.0.118 up to 0.118 in
Maximum drilling depth
7.874 in
Travel path of the electrode guide
3.937 in
Heavy duty generator
30 A
Mains connection
3 x 400 V, 50/60 Hz
3 x 400 V, 50/60 Hz
Electric supply
Maximum power consumption
5 kVA
Touch screen, 12.1”
Touch screen, 12.1”
Pump operating pressure
1014.94 psi
Machine dimensions width x depth x height
1345 x 910 x 1940mm
52.953 x 35.827 x 76.378 in
Total weight (without dielectric)
1918.0 lb


Products & solutions

Reference not found: /content/gfac/country_AT/en/service/flyout_teaser/jcr:content/par/sub_navi_teaser