MILL P 500 U - MILL P 800 U
- MILL P 500 U
- MILL P 500 U
MILL P 800 U S – La macchina che cresce con le tue esigenze
La serie Mikron MILL P 800 U S offre una produttività intelligente per aiutare i produttori di stampi e matrici a superare le proprie sfide. I rapidi sviluppi del mercato e le innovazioni che hanno un impatto sul futuro mettono alla prova l'abilità dei produttori di stampi e matrici nell'adattarsi ai cambiamenti. GF Machining Solutions fornisce a questi produttori le sue fresatrici simultanee a cinque assi Mikron MILL P 800 U S. La Mikron MILL P 800 U S è un centro macchina molto robusto, stabile e accurato con design a cavalletto e infinite possibilità di automazione. Questa soluzione di fresatura a cinque assi è progettata per applicazioni di lavorazione ad alte prestazioni. Al fine di garantire la massima accuratezza e la migliore finitura superficiale attraverso operazioni simultanee, la macchina è dotata di trasmissioni dirette raffreddate ad acqua negli assi rotanti e girevoli. Grazie alla sua concezione compatta unica e alla sua modularità, la macchina assicura applicazioni di lavorazione precise sia sul pezzo singolo sia nella produzione in serie rapida.
- MILL P 800 U S
- MILL P 800 U S
- MILL P 800 U S
- MILL P 800 U S
Specifiche
Main Specifications
Main Specifications |
|
Travel X, Y, Z | 500 x 600 x 450 mm |
Feed rate X/Y/Z | 45 (61 dynamic version) m/min |
Swivelling range | +91/-121° |
Rotary range | n x 360 rpm |
Feed rate swivel | 25 (50 dynamic version) rpm |
Feed rate rotary | 35 (60 dynamic version) rpm |
Working table | T-slot table Ø500 System 3R Dynafix / Delphin / Erowa UPC |
Table load | 200 / 600 kg |
Working spindle | 20'000 rpm - HSK-A63 |
Tool magazine | 30 / 60 / Tool Tower 120 / 170 / 215 pockets |
Footprint | |
Automation | Pallet magazine 7 Dynafix / UPC Pallet magazine 5 Delphin System 3R Workpartner 1+, Transformer WorkMaster & Transformer 6-axis |
Main Specifications
Main Specifications |
|
Travel X, Y, Z | 800 x 600 x 500 mm |
Feed rate X/Y/Z | 45 (61 dynamic version) m/min |
Swivelling range | +91/-121° |
Rotary range | n x 360 rpm |
Feed rate swivel | 25 (50 dynamic version) rpm |
Feed rate rotary | 35 (60 dynamic version) rpm |
Working table | T-slot radial / parallel Ø630 mm T-slot radial / parallel Ø500 mm System 3R Delphin 400 x 400 / 500 x 500 / 500 x 630 mm |
Table load | 500 / 1000 kg |
Working spindle | 20'000 rpm - HSK-A63 28'000 rpm - HSK-A63 |
Tool magazine | 30 / 60 / Tool Tower 120 / 170 / 215 pockets |
Footprint | |
Automation | Pallet magazine 7x (500x630) Pallet magazine 9x (500x500) Pallet magazine 12x (400x400) System 3R Workpartner 1+, Transformer WorkMaster & Transformer 6-axis |
Main Specifications
Main Specifications |
|
Travel X, Y, Z | 800 x 600 x 500 mm |
Feed rate X/Y/Z | 61 m/min |
Swivelling range | +91/-121° |
Rotary range | n x 360 rpm |
Feed rate swivel | 50 rpm |
Feed rate rotary | 100 milling / 800 Simultaneous Turning rpm |
Working table | T-slot table radial Ø 730 / Ø 500 mm System 3R Delphin 400 x 400 / 500 x 500 / 500 x 630 mm |
Table load | 800 kg |
Working spindle | 20'000 rpm - HSK-T63 |
Tool magazine | 30 / 60 / Tool Tower 120 / 170 / 215 pockets |
Footprint | |
Automation | Pallet magazine 7x (Ø730) Pallet magazine 9x (Ø500) Others on request |
Main Specifications
Main Specifications |
|
Travel X, Y, Z | 800 x 800 x 500 mm |
Feed rate X/Y/Z | 61 m/min |
Swivelling range | +91/-121° |
Rotary range | n x 360 rpm |
Feed rate swivel | 25 rpm |
Feed rate rotary | 35 rpm |
Working table | System 3R Delphin 500 x 500 mm |
Table load | max. 1000 kg |
Working spindle | 20'000 rpm - HSK-A |
Tool magazine | Tool Tower 170 pockets |
Footprint | |
Automation | System 3R Transformer 6-axis Others on request |