Atomation made simple
With glass doors across one full side, the WorkPal 1 gives maximum access to the magazine. This greatly facilitates the loading and unloading of pallets.
WorkPal 1 is a pallet changer that requires minimal floor space.
Wire-cutting EDM (wireEDM) application
- Wire-cutting EDM (wireEDM) application
- Milling application
- Laser application
The WorkPal 1 can lift and handle a total weight of 50 kg including gripper, pallet and workpiece.
The WorkPal 1 serves all technologies like EDM, WEDM, Milling, Laser and Grinding
The WorkPal 1 supports 1 tooling system in the magazine. There are 20 different tooling systems which can be prepared for in the magazine.
Prepare an extra shift and make sure you produced 24/7.
No of positions
|Magazine capacity/application||Pallet system||No of positions|
|Table chuck – milling, grinding or EDM||Macro 54 & 70||24, 40 or 60|
|Macro with chip guard||24|
|GPS 70||24, 40 or 60|
|Macro Ø 116||20|
|MacroMagnum||6, 10 or 12
|Matrix 142||6, 10 or 12|
|UPC (fork gripper or RCS)||4|
|ITS 50||24, 40 or 60|
|ITS 148||6, 10 or 12|
|Table chuck - wire EDM||Macro WEDM||12|
|PSW (RDS grippper)||12|
|Wire EDM B-axis||Macro 54 & 70||12, 24 or 40|
|ITS 50||12, 24 or 40|