The Turbomill is designed for the production of airfoils with 5-axis simultaneous machining technology. Extensive manufacturing experience and CAM programming to suit application specific requirements in technology and service are provided by Liechti – a team of specialist in the production of turbomachinery components for aerospace and power generation.
Highest profile accuracy and trailing edge quality in shortest machining time
Complete machining in one setup, including bar feeding, five-axis Milling, turning, root machining, threading, chamfering, engraving and brushing
Rigid, compact layout of all axes for high jerk machining
Turn-key solution including specialized TurboSoft plus CAM software
Roughing and finishing of airfoil, hub and shroud in 1 setup as well as probing and adaptive machining of mid-span, chord and further areas of turbine blades.
Uncompromising for airfoils
High-dynamic machining around the entire airfoil for better quality results and longer tool life.
A high-performance machine, designed for precise airfoil manufacturing. Powerful yet compact, the Turbomill 500g provides high dynamics, stable machining at high speed and with high accuracy.
go-Mill 350
REC. PART DIA: 350 mm ; WORKZONE LENGTH: 505 mm
Turbomill 2000 gx / 2000 gx Twin / 2600 gx
REC. PART DIA: 700 mm, 395 mm, 700 mm
WORKZONE LENGTH: 2000 mm, 2000 mm, 2600 mm
Turbomill 800g / 800g Twin / 1400g / 1400g Twin
REC. PART DIA: 450 mm, 300 mm, 450 mm, 300 mm
WORKZONE LENGTH: 800 mm, 800 mm, 1400 mm, 1400 mm
Turbomill 800 i / 1400 i
REC. PART DIA: 400 mm, 400 mm
WORKZONE LENGTH: 800 mm, 1400 mm
Turbomill 500g
Setting the new standard of blade machining
Improve your overall equipment efficiency
Reduce your cycle times
Increase your quality rate
Reduce your maintenance costs
One single source provider
High productivity with g-technology
Reduce your cycle times up to 30%. Keep the profile feed rate higher, especially around the leading and trailing edge. Utilize unmatched dynamics with 2 g acceleration, while maintaining a high level of precision through a solid and stiff machine equipped with direct torque motors in all axis.
Flawless surface quality
Ultra-dynamic point finishing allows for short machining cycle times and repeatable sustainable production. Due to high feedrates, short travel distances and new tool change gripper, non-cutting times are massively reduced. The use of direct drives on all axes significantly increases tool life.
Automated bar feeder
Ramp up your airfoil production with an automated bar feeder, for unattended manufacturing. When the part is finished, an extractor automatically removes the part from the working area and the machine can continue to produce.
Tool Pivot Point
Guarantee high speed and accuracy, while maintaining an efficient and sustainable airfoil production. The machine head rotates from -90° to +90°, allowing perfect part accessibility during the milling process and avoiding additional machine setup. Produce the first part right and avoid scrap parts.