The DMP Flex 350 delivers the purest atmosphere during printing: a consistently low oxygen environment (fewer than 25 parts per million). This solution ensures excellent microstructures and very high density and stable mechanical properties.
High throughput 3D metal printing is ensured by the solution’s fast, bidirectional material deposition. At the same time, users’ productivity is accelerated by high printer utilization and short changeover time.
An efficient factory is streamlined from end to end. With extensive experience in the production environment, our engineers have packaged their production workflow expertise into functional modules that enable maximum uptime and efficiency.
DMP Flex 350
- DMP Flex 350 front
- AM process
- DMP Flex 350 front open
- 3DXpert® software
- DMP Flex 350 side
- Hip cups
- DMP Flex 350 side open
- 3DXpert® all-in-one software
Ready-to-run metal alloys with thoroughly tested build parameters (Inconel, Titanium, Cobalt Chrome, Aluminium, Steel).
Print large and high metal parts with our middle-size printer (*height inclusive of build plate).
Guarantees consistent powder quality for high quality parts.
3DXpert® streamlines your process to quickly and efficiently transition from a 3D model to a successfully printed part.
DMP Factory 350
Ensure maximum safety and powder integrity
DMP Factory 350 has an integrated powder management system with high-performance sieving and automated powder conveyance. The O2-free atmosphere of the powder workflow guarantees highest part quality as well as maximum powder usage and minimizes user powder contact.
- DMP Factory 350 front
- DMP Factory 350 side
DMP Flex/Factory 350 Features
Unique vacuum chamber concept
Consistent, low O2 environment
Reduce your cost to part by avoiding non-quality scrap issues and get access to higher-margin regulated markets like aerospace and medical, where constant quality is a requirement for certified parts. Discover these benefits, thanks to our consistently low 02 environment in the printer to guarantee consistent powder quality for high-quality parts.
Boost your productivity
Accelerate your productivity to reduce your cost per part, thanks to our high-performance, bidirectional recoating system that consistently and accurately deposits a fresh powder layer on each pass to reduce the time that the lasers are active.
Real-time process monitoring
DMP Monitoring allows users to see, analyze, understand and fine-tune their metal AM process with unprecedented capability. The DMP Monitoring toolset for enhanced quality control includes real-time process monitoring, synchronized images of the melt pool and powder bed, synchronized images of active and archived jobs for comparison, and a toolset for analyzing the magnitude of a subject area, enabling:
- Real-time, in-build data collection and visualization
- Post-build process analysis
- Build parameter optimization
All-in-one integrated software for Additive Manufacturing
3DXpert is an all-in-one integrated software to prepare, optimize and manufacture 3D CAD models using additive manufacturing (AM). Supporting every step of the additive manufacturing workflow from design to post-processing, 3DXpert streamlines your process to quickly and efficiently transition from a 3D model to a successfully printed part.
DMP Flex 350 Feature
Removable print module
Increase your flexibilty
Improve your flexibility and productivity with a Removable Print Module (RPM) that can be replaced with another RPM just after a job is finished. This also positively impacts the total cost of ownership because you can reduce downtime when switching from one material to another material by having one dedicated RPM per material.
DMP Flex/Factory 350 Dual
The DMP Flex 350 and DMP Factory 350 systems now come in a two-laser configuration, reducing build times by up to 50 percent. Boosting productivity while maintaining high quality and repeatability yields lower operational costs.
New Dual Laser (2x 500 W) configuration
Increases productivity and reduces costs
New pre-filter cyclone system
Decreases filter costs
New heated platform
Reduces risk cracking of specific building jobs
Enhanced Removable Print Module
Enables easy, fast and consistent calibration
Enhanced coater accuracy
Decreases machine-to-machine variability
Enhanced coater cutting tool
Decreases operator errors and machine-to-machine variability
New back powder tray on exhaust
Reduces loss of powder during cleaning
New Railroad UI in Operator mode
Reduced operator error
- DMP Flex 350 Dual front
- DMP Flex 350 Dual side
- DMP Factory 350 Dual front
- DMP Factory 350 Dual side
|Machine dimensions||2370 x 2400 x 2869 mm (DMP Flex 350 in printing condition)|
|2370 x 2400 x 3470 mm (DMP Factory 350 in printing condition)|
|Machine weight||4200 kg|
|Laser type||1 or 2 x 500 W / Fiber laser|
|Laser wavelength||1070 nm|
|Layer thickness, range, preset||Adjustable, min. 5 μm, typical: 30, 60, 90 μm|
|Build envelope||275 x 275 x 420 mm (height inclusive of build plate)|
|Material deposition||Soft blade recoater|
|Minimum feature size
|Minimum wall thickness
||± 0.1-0.2% with ± 100 μm minimum|
|Repeatability (related to actual printed jobs)
||Δx (3σ) = 60 μm, Δy (3σ) = 60 μm, Δz (3σ) = 60 μm|
|LaserForm Ni718, LaserForm Ni615, LaserForm Ti Gr23, LaserForm Ti Gr5, LaserForm Ti Gr1, LaserForm AlSi10Mg, LaserForm AlSi7Mg0.6, LaserForm CoCrF75, LaserForm 316L, LaserForm 17-4PH, LaserForm Managing Steel, AMPO M789, Certified Tungsten, Aluminum A6061|